Web Analytics
MARKETS
Copper6.29 /lb+0.91%
Aluminum3,203.50 /t+0.38%
Lithium ETF60.91+1.21%
Uranium ETF32.34+4.39%
Rare Earth ETF51.40+1.72%
Delayed · as of Nov 9 · 03:15 ET
Stocks To Watch

ATEX Stretches Valeriano's B2B Breccia Strike by 50%

ATEX Resources drilled about 28,400 metres at Valeriano in Phase VI, lengthened the B2B breccia strike by half and logged 40m of 4.83% CuEq, with Phase VII due early Q4 2026.

Aaron Delgado 7 min read
Aerial view of a rugged mountain peak in Toluca, Mexico, showcasing eroded terrain and sunlit features.

ATEX Resources Inc. (TSX: ATX) said its Phase VI drill program at the Valeriano copper-gold project in Chile's Atacama Region totalled roughly 28,400 metres, extended the high-grade B2B breccia strike by 50% and found new mineralization east and north of B2B, with Phase VII starting in early Q4 2026 and an updated resource estimate due in the second half of 2027.

ATEX Resources Inc. (TSX: ATX) has closed out the biggest drill campaign in its history at the Valeriano copper-gold project in Chile's Atacama Region, and the headline result is geometric rather than incremental: the high-grade B2B breccia, the part of the deposit that carries the best grades, is now interpreted to run 50% further along strike than it did before Phase VI. The company also reported new mineralization outside B2B to the east and to the north — the kind of finding that turns a single deposit into an exploration district, if follow-up drilling holds up.

Phase VI totalled approximately 28,400 metres of drilling, beating the 25,000-metre target ATEX set for itself by roughly 3,400 metres and coming in more than 70% larger than Phase V. That escalation matters for how investors should read the results. A program that grows by that much between campaigns is usually one where the geological model is being rewarded rather than corrected.

The intercepts that carried the program

ATEX described several of the strongest drill results in its exploration history, all within the B2B breccia:

  • ATXD25C — 40 metres of 4.83% copper equivalent, sitting inside a broader 86 metres of 3.84% CuEq
  • ATXD23C — 78 metres of 3.03% CuEq
  • ATXD26B — 186 metres of 2.15% CuEq
  • ATXD32 — 56 metres of 2.36% CuEq

Copper equivalent, or CuEq, rolls the gold and other payable metals in a sample into a single copper-grade number so intervals can be compared on one scale. It is a convenience, and it depends on the metal prices and recovery assumptions used, so the underlying copper and gold splits always deserve a look. But even allowing for that, the combination on display here is unusual: a 40-metre interval approaching 5% CuEq speaks to a very high-grade core, while a 186-metre interval above 2% speaks to width. Deposits typically offer one or the other.

The distinction between a high-grade core and a broad halo is the whole argument in porphyry-style copper-gold projects. Bulk tonnage at low grade works only at scale and with a long capital runway. A high-grade breccia inside a larger mineralized envelope offers something different — the possibility of sequencing higher-margin material early in a mine life, which is what shortens payback periods and makes financing conversations easier.

Why a 50% longer strike changes the resource arithmetic

Strike length is one of the three dimensions that set the size of a deposit, alongside width and depth. Extending the high-grade B2B breccia by half its previously mapped length does not translate one-for-one into a bigger resource — continuity, grade distribution and drill density all intervene — but it does expand the volume of rock that geologists are now entitled to model as high-grade.

That is why the timeline ATEX has laid out is the part to watch. The company said an updated mineral resource estimate is expected in the second half of 2027. Drill results are interpretations; a resource estimate is the number that flows into valuation models, and it is the document that analysts and potential partners will price off. Between now and then, the Phase VII drill program is scheduled to begin in early Q4 2026, aimed at multiple high-priority targets across Valeriano plus new regional exploration intended to test whether the project is a district rather than a deposit.

Details of Phase VII are still to come. Its scope will be informative in itself: a program built mainly to infill and tighten spacing inside B2B points to a company converting inventory ahead of a resource update, while one weighted toward the new eastern and northern mineralization points to a company still chasing discovery. ATEX has signalled it intends to do both.

Where the stock sat as the results landed

The market reaction on the day was muted to negative. ATEX's OTCQX listing, ATXRF, last traded at 1.66, down 2.58% from the prior close of 1.71, with a session range of 1.63 to 1.70, as of the last trade at 20:00 GMT on 16 September 2026. The licensed quote feed did not specify the trading currency for that line, so the figure is stated as quoted. The Canadian primary listing trades under ATX on the Toronto Stock Exchange.

The licensed quote feed did not specify the trading currency for that line, so the figure is stated as quoted.

The broader tape was soft on the same session, which complicates any read on the drill news itself. The S&P 500 tracker (SPY) closed at $754.05, down 0.44%, and the Dow 30 tracker (DIA) finished at $515.22, down 1.15%, while the Nasdaq 100 tracker (QQQ) was effectively flat at $704.72, up 0.03%. A sub-3% move in a developer-stage explorer against a weak index day is close to noise.

There is also a structural reason drill results of this quality can land without a share-price surge. Exploration news at a project already under active drilling is often partly anticipated, and the value-accretive event on ATEX's own stated calendar is more than a year away. Between an interpretation release and a resource estimate, an explorer is judged mainly on whether it can fund the drilling — and each larger campaign, at 28,400 metres and rising, raises that bill.

What to test before the 2027 resource update

Three things will determine whether Phase VI reads as a turning point or a good quarter. First, whether the east and north mineralization connects to B2B or stands alone — separate zones are still valuable, but continuous ones are cheaper to mine. Second, the metal split behind those CuEq figures, since gold-heavy intervals behave differently through a mill and through a price cycle than copper-heavy ones. Third, drill density: a 50% strike extension defined by widely spaced holes carries more interpretive risk than one drilled off tight sections, and the resource estimate will apply that discipline whether or not the market does.

The full interpretation and findings from the campaign were set out by the company and reported via INN Precious Metals. Atacama's advantage for a project of this type is established infrastructure and a long-standing copper workforce; its constraint is water and altitude, both of which weigh on capital costs later in the development cycle. Those trade-offs only start to bite once a resource is defined — which puts the second half of 2027, and the Phase VII drilling that feeds it, at the centre of the ATEX story from here.

Key facts

  • ATXRF last close: 1.66, -2.58% (as of 20:00 GMT, 16 Sep 2026); TSX: ATX, OTCQX: ATXRF
  • Phase VI drilling: ~28,400m, vs 25,000m target; more than 70% larger than Phase V
  • Best intercept: ATXD25C: 40m of 4.83% CuEq within 86m of 3.84% CuEq
  • Next catalysts: Phase VII drilling from early Q4 2026; updated resource estimate 2H 2027

Frequently asked questions

What did ATEX report from Phase VI at Valeriano?

ATEX Resources said its Phase VI drill program at the Valeriano copper-gold project in Chile's Atacama Region expanded the high-grade B2B breccia strike length by 50% and discovered new mineralization beyond B2B to the east and north. The campaign totalled approximately 28,400 metres, exceeding its 25,000-metre target and running more than 70% larger than Phase V.

Which drill holes produced the strongest grades?

Four holes stood out, all within the B2B breccia. ATXD25C returned 40 metres of 4.83% copper equivalent inside a wider 86 metres of 3.84% CuEq. ATXD23C returned 78 metres of 3.03% CuEq, ATXD26B returned 186 metres of 2.15% CuEq, and ATXD32 returned 56 metres of 2.36% CuEq. ATEX described these among the most significant intercepts in its history.

What does copper equivalent, or CuEq, mean?

Copper equivalent combines the value of all payable metals in a sample — typically copper plus gold at Valeriano — into a single copper-grade figure so intervals can be compared on one scale. The calculation depends on assumed metal prices and metallurgical recoveries, so the underlying copper and gold grades behind a CuEq number matter for judging how a deposit would actually process.

When is the next ATEX drill program and resource update?

The Phase VII drill program is expected to commence in early Q4 2026, with further details to be released closer to the start. It is designed to advance multiple high-priority targets across Valeriano and to begin new regional exploration. An updated mineral resource estimate for the project is expected in the second half of 2027.

How did ATEX shares react to the Phase VI results?

ATEX's OTCQX line, ATXRF, last traded at 1.66, down 2.58% from a prior close of 1.71, in a session range of 1.63 to 1.70 as of 20:00 GMT on 16 September 2026. Broader US benchmarks were also weaker that session, with the S&P 500 tracker down 0.44% and the Dow tracker down 1.15%.

Why does a longer strike length matter for a copper project?

Strike length is one of three dimensions — alongside width and depth — that determine the volume of mineralized rock in a deposit. Extending the high-grade zone by 50% widens the body of material geologists can model at higher grade. It does not translate one-for-one into a larger resource, because continuity and drill spacing still govern what can be formally counted.

Sources

Photo: Ezkol Arnak · Pexels Licence — source

Filed under Stocks To Watch

More on Stocks To Watch

See all →