Perovskites are a class of synthetic materials that have a crystalline structure similar to that of the naturally occurring mineral calcium titanate. They have been the subject of many studies because they exhibit exciting and unique properties that can be tuned according to their composition. One of their potential applications is as catalysts for the synthesis of ammonia. In other words, specific perovskites can be placed inside a reaction chamber with nitrogen and hydrogen to promote the reaction of these gases to form ammonia.
Ammonia is a useful substance that can be employed in the production of fertilizers and artificial chemicals, and even as a clean-energy carrier in the form of hydrogen, which may be key in eco-friendly technologies. However, there are various challenges associated with the synthesis of ammonia and perovskites themselves.
The synthesis rate for ammonia is generally limited by the high energy required to dissociate nitrogen molecules. Some researchers have had some success using precious metals such as ruthenium. Recently, perovskites with some of their oxygen atoms replaced by hydrogen and nitrogen ions have been developed as efficient catalysts for ammonia synthesis. However, the traditional synthesis of perovskites with such substitutions usually has to be carried out at high temperature (over 800 degrees Celsius) and over long periods of time (weeks).
To address these issues, in a recent study carried out at Tokyo Tech, a group of researchers led by Prof. Masaaki Kitano devised a novel method for the low-temperature synthesis of one of such oxygen-substituted perovskite with the chemical name BaCeO3-xNyHz and tested its performance as a catalyst to produce ammonia. To achieve this, they made an innovative alteration to the perovskite synthesis process. The use of barium carbonate and cerium dioxide as precursors involves a very high temperature, which is required to have them combine into the base perovskite, or BaCeO3, because barium carbonate is very stable. In addition, it is necessary to substitute the oxygen atoms with nitrogen and hydrogen ions. On the other hand, the team found that the compound barium amide reacts easily with cerium dioxide under ammonia gas flow to directly form BaCeO3-xNyHz at low temperatures and in less time. “This is the first demonstration of a bottom-up synthesis of such a material, referred to as perovskite-type oxynitride-hydride,” explains Prof. Kitano.
The researchers first analyzed the structure of the perovskite obtained through the proposed process and then tested its catalytic properties for the low-temperature synthesis of ammonia under various conditions. Not only did the proposed material outperform most of the state-of-the-art competitors when combined with ruthenium, but it also vastly surpassed all of them when combined with cheaper metals such as cobalt and iron. This represents tremendous advantages in terms of both performance and associated cost.
Finally, the researchers attempted to elucidate the mechanisms behind the improved synthesis rate for ammonia. Overall, the insight provided in this study serves as a protocol for the synthesis of other types of materials with nitrogen and hydrogen ion substitutions and for the intelligent design of catalysts. “Our results will pave the way in new catalyst design strategies for low-temperature ammonia synthesis,” concludes Prof. Kitano. These findings will hopefully make the synthesis of useful materials cleaner and more energy efficient.